Sitting at the very top of the D-Max range, the Blade starts at $76,990 drive-away. Now, that’s some $9000 more than the previous flagship, the continuing X-Terrain.
Keep in mind, though, that the Blade is actually based on the mid-range D-Max LS-U, that starts from almost $15,000 less.
And, as with the Warrior, Thunder, Rogue and Ford Ranger Tremor that Isuzu is chasing, you don’t get any more performance.
To refresh, the LS-U includes auto bi-LED headlights, keyless entry/start with auto walkaway locking, dual-zone climate control, leather/leatherette upholstery, heated and powered front seats, a 7.0-inch driver display, a 9.0-inch central touchscreen, a reverse camera, DAB+ digital radio, wireless Apple CarPlay and Android Auto, a tub liner, tailgate assistance and a full-sized spare alloy wheel.
So, what does that extra $15K buy you?
Walkinshaw – formerly of HSV fame but more-recently responsible for the remanufactured (in Melbourne) Ram 1500, Chevrolet Silverado and Toyota Tundra full-sized utes – has brought some significant upgrades to the Blade, in an Australian-exclusive program that’s spanned three years, more than a dozen prototypes and over 100,000km of local testing.
Much of that was in the outback as well as the ex-Holden proving ground at Lang Lang.
Over the regular D-Max, changes include uprated suspension, better clearances, improved underbody protection and bolder visuals.
Kicking things off is a 22.5/25mm front/rear lift (though the coil spring rates remain) due to 16mm-larger Monroe 35mm MTV twin-tube dampers with lifted spring seats. Ground clearance is now 244mm (front) and 215mm (rear axle low point); approach, departure and breakover angles are 29.2 degrees, 19.2° and 25.2° respectively. Wading depth remains at 800mm.
The Blade debuts Goodyear Wrangler Duratrac RT 275/65R17 all-terrain tyres, new 17x8.5-inch flow-formed alloy wheels. As they incorporate a +17-degree offset, tracks are 32mm wider (to 1602mm).
Under the D-Max’s nose is a steel underbody protection bash plate that is double the thickness of the original at 3mm, while the revised load-rated recovery point system includes an integrated cross-member, which braces both chassis rails together for improved torsional rigidity and reduced deflection when under the maximum eight-tonne load from an angle of up to 35 degrees.
Kerb weight jumps to 2204kg, which is a 99kg increase over the LS-U.
With many being ex-Holden, Ford, Toyota and IVECO during their local full-vehicle manufacturing era, Walkinshaw’s 60-strong team of engineers, designers and automotive specialists in Clayton have modified a ute in a similar way, then, that Premcar has turned the Navara into the Warrior.
But does the Blade meet Isuzu Ute Australia’s (IUA) brief for improved or upgraded off-road ability, ground clearances, underbody protection, approach angles, lighting and aesthetics?
Keep reading.