Can I fit a boot release latch from a 2005 Ford Focus LS to a 2006 model?
Asked by Carol
Will a boot release latch from a 2005 LS Focus fit a 2006 LS Focus?
Answered by CarsGuide
17 Jan 2024This all depends on whether the 2005 Focus is a Mark 1 or Mark 2 version of the Focus. So that's the first thing to ascertain. If they're both Mark 2 cars, then there's a very good chance that the boot release will be the same in either (and, therefore, interchangeable) as we're talking about the same car.
But even if the 2005 Focus is a Mark 1 model, it would still be worth physically checking to see if the release latches are the same. That's because even though the Mark 1 and Mark 2 Focuses were different cars, many manufacturers (Ford included) carried over some mechanical parts (such as latches and cables) from previous models to save on development costs. A good example of Ford doing this was the succession of 1980s Falcons including the XD, XE and XF models which all used the same exterior door handles. So compare the latch you have with the latch on offer and make sure it operates in the same way and direction, uses the same mounting points and will connect to the same cable. If so, you might just be lucky.
Other Ford Focus problems
- 2012 Ford Focus won't start after performing maintenance
- Is there an issue with the fuel tank in my 2008 Ford Focus?
- Can I put the motor of a 2016 Ford Focus in a 2012 model?
- Are there any known transmission issues with a 2012 Ford Focus manual?
- Is the wiring harness on a 2005 Ford focus ZX42.0 interchangeable?
- Will the transmission from a 2008 Ford Focus fit a 2018 model?
- Ford Focus Bluetooth: How to Use Bluetooth in a Ford Focus?
- Were the automatic transmission issues of the 2017 Ford Focus rectified in the LZ and later models?
