Holden Colorado 2011: Clutch pedal staying on the floor
- Holden Colorado
- Holden Colorado 2010
- Holden Advice
- Holden Colorado Reviews
- Holden Commercial Range
- Holden Ute Range
- Holden
Asked by Gordon McLellan
I have not long purchased a 2010 Holden Colorado, which has done 72,000 km. Recently the clutch pedal went to the floor and stayed there. I pulled it back by hand but when I went to push it in again it was rock hard and the clutch was still disengaged. It went back to the seller's yard by tilt tray where they managed to get it to function correctly. On pulling off the inspection covers they ascertained that the clutch is brand new, and they are now pulling the gearbox out to try and find the problem. Prior to this occasionally the pedal was slow to follow your foot back up off the floor and the pedal had to be as good as all the way out before the clutch disengaged. Any suggestions?
Answered by CarsGuide
5 Jun 2015On the surface it would seem that there is a problem with the clutch, it could be that the pressure plate has collapsed or something similar. Pulling the gearbox out should enable the mechanics to find the cause of the problem.
Other Holden Colorado problems
- Is a 2014 Holden Colorado ute positively or negatively earthed?
- Experiencing shudder in my 2013 Holden Colorado
- Common engine and gearbox issues with the 2015 Holden Colorado
- 2018 Holden Colorado has leaks in the top near the brake light
- The steering shaft lower spline to steering rack in my 2016 Holden Colorado RG7 Trailblazer is loose
- 2009 Holden Colorado check engine light and limp mode are coming on
- My 2015 Holden Colorado isn't starting
- Fuel economy issues in my 2019 Holden Colorado Z71
