What do I need to know about replacing the rack and pinion in my 2007 Ford Focus SE?
Asked by Anthony
My 2007 Ford Focus SE needs its rack and pinion changed. Which years can I choose from and will it need to be reprogrammed?
Answered by CarsGuide
14 Jan 2025This generation Ford Focus was the first to use electro-hydraulic power-steering. As such, you can’t transpose the rack and pinion hardware from any other model; it would need to be this exact version of the Focus for everything to be compatible.
Once you’ve swapped the hardware, the electronics would also need to be coded and matched to the car’s body computer, as this is what controls the speed-sensitive variations in the steering assistance as well as functions such as the self-parking facility.
Disclaimer: You acknowledge and agree that all answers are provided as a
general guide only and should not be relied upon as bespoke advice. Carsguide
is not liable for the accuracy of any information provided in the answers.
Other Ford Focus problems
- Battery problems with my 2012 Ford Focus
- Can I get replacement air conditioner pulley/bearings from a salvage yard?
- 2012 Ford Focus won't start after performing maintenance
- Is there an issue with the fuel tank in my 2008 Ford Focus?
- Can I put the motor of a 2016 Ford Focus in a 2012 model?
- Are there any known transmission issues with a 2012 Ford Focus manual?
- Can I fit a boot release latch from a 2005 Ford Focus LS to a 2006 model?
- Is the wiring harness on a 2005 Ford focus ZX42.0 interchangeable?
