Where is the fuse for the reverse lights/reverse camera located in the 2013 Holden Colorado?
Asked by Peter
Where is the fuse for the reverse lights/reverse camera located in the 2013 Holden Colorado?
Answered by CarsGuide
30 Sep 2021This is a weird one. I spoke to two different Holden service workshops (former Holden dealers) and the consensus was that the reverse lights on your car are not on a separate fused circuit. Certainly there’s no mention of such a fuse in the owner’s manual. That means, then, that the reverse lights share a circuit with other functions at the rear of the vehicles, possibly the tail-light circuit. Beyond that, nobody could be specific.
In turn, that suggests that it’s not the fuse at fault because, if it was, the whole rear of the vehicle would be blacked-out. Which brings us to the possibility that the problem, rather than being a blown fuse, is rather the adjustment of the switch that recognises the car is in reverse and turns on the lights and camera. This is located on the side of the transmission and, if it’s out of alignment or showing wear in its contacts or wiring, could lead to the problem you have.
Other Holden Colorado problems
- 2014 Colorado LTZ RG makes a grinding noise after brake replacement
- My 2016 Holden Colorado is crunching gears
- Why does the horn on my 2019 Holden Colorado beep twice roughly 30 seconds after locking?
- My 2017 Holden Colorado has a vibration in the cabin at low speed
- 2015 Holden Colorado oil pressure warning coming on intermittently
- 2015 Holden Colorado 4x4 rear differential bearings worn
- Does the 2011 Holden Colorado have any known turbocharger problems?
- Does the 2017 Holden Colorado range have different automatic gearboxes
