Isuzu D-Max: Engine won't rev
- Isuzu D-Max
- Isuzu D-Max 2012
- Isuzu Advice
- Isuzu D-Max Reviews
- Isuzu Commercial Range
- Isuzu Ute Range
- Isuzu
- Car Servicing
Asked by Chota Ngulube
My Isuzu D-Max starts and the engine runs very well, but it can't rev. The machine detected a faulty throttle position sensor, which I replaced with a new one, but it failed again. What could be the problem?
Answered by CarsGuide
21 Jan 2017It would suggest it wasn’t the throttle position sensor that was faulty, but it could be a connector to the sensor that has caused the problem. If that isn’t the problem look elsewhere, and I would suggest the crank angle sensor.
Disclaimer: You acknowledge and agree that all answers are provided as a
general guide only and should not be relied upon as bespoke advice. Carsguide
is not liable for the accuracy of any information provided in the answers.
Other Isuzu D-Max problems
- Cracked canopy on a 2018 Isuzu D-Max ute
- Issues with 2011 Isuzu D-Max cooling system
- What tow vehicle or hybrid camper should I consider for after retirement?
- My 2019 Isuzu D-Max doesn't display the gear I'm in
- Issues with an Isuzu D-Max's SVS dash light
- 2013 Isuzu D-Max has developed a shudder at low speeds
- Is a failed transmission in a 2018 Isuzu D-Max covered by warranty?
- 2019 Isuzu D-Max would not rev to cross a small rise
