Ford Focus 2004: Can the engine from a 2000 Focus fit in it?
Asked by Geniel
Can a 2000 Ford Focus engine go into a 2004 Ford Focus?
Answered by CarsGuide
4 May 2020Your question is a bit confusing Geniel, because the Ford Focus wasn’t released in Australia until September 2002. Which is to say, there wouldn’t be any 2000 model-year Focus engines lying around waiting to be fitted to another Focus. However, the original Focus was launched in Europe in 1998 and that car was broadly the same structurally as the version sold right up to 2005 in Australia.
The catch, of course, is that the Focus was sold with both a 1.8 and a 2.0-litre engine here, so you’d need to make sure that you were trying to fit exactly the same engine in exactly the same specification to ensure that everything from the fuel lines to the wiring loom and the cooling system to the gearbox matched up and fitted properly.
If, by some chance, you’ve found an imported Focus engine, be very wary of fitting that as it may not have the appropriate pollution equipment fitted to be legally registered in Australia. And don’t forget, whenever you swap an engine you need to inform the registration authorities and your insurance company of the new engine number.
Other Ford Focus problems
- Battery problems with my 2012 Ford Focus
- What do I need to know about replacing the rack and pinion in my 2007 Ford Focus SE?
- Can I get replacement air conditioner pulley/bearings from a salvage yard?
- 2012 Ford Focus won't start after performing maintenance
- Is there an issue with the fuel tank in my 2008 Ford Focus?
- Can I put the motor of a 2016 Ford Focus in a 2012 model?
- Are there any known transmission issues with a 2012 Ford Focus manual?
- Can I fit a boot release latch from a 2005 Ford Focus LS to a 2006 model?
