Question 1

What does a code 89 mean in a 2012 Holden Barina?

Accepted Answer

The answer to this will depend on exactly which model Barina you have. In some models (typically earlier ones) the code is simply a servicing reminder to make sure the owner knows maintenance is due. But in some versions of the Barina of this era, fault code 89 usually relates to a problem with the car’s thermostat. So don’t drive it any farther as the faulty thermostat could cause the engine to overheat with catastrophic results. Have a mechanic check things out and see if the thermostat is indeed faulty. If it is, it’s a relatively cheap fix, certainly compared with the cost of a new engine. Sometimes the code relates to a switch in the thermostat that is responsible for switching on the car’s electric fans, but either way, it could lead to overheating. Don’t ignore it in any case.

Question 2

My 2016 Holden Barina keeps showing a warning light on my dashboard when I'm driving. Is it being caused by the emission's monitoring system?

Accepted Answer

The only real way to properly overcome a dashboard – or a 'check engine’ – warning light is to fix the problem that caused it to light up in the first place. Cars like yours have lots of sensors dotted around them to keep an eye on things like the emissions controls and a small glitch in one of these can cause the warning light to illuminate. The best way forward is to have the car electronically scanned at a workshop equipped to do so. From there, the car can tell the mechanic what’s wrong and you can pinpoint the exact problem. Otherwise you’ll be stabbing in the dark, as these systems can be very complex and made up by lots of different sensors and triggers, all of which can give the same warning light. Beyond that, a car’s oxygen sensor (which lives in the exhaust system and sniffs the engine’s emissions) is a likely culprit. But don’t guess: scan the car’s computer and find out for sure.

Question 3

Do I have an air leak in my 2010 Holden Barina's intake manifold?

Accepted Answer

This generation of Holden engines was prone to failure of the crankcase ventilation valve (PCV). When it failed, it caused a vacuum leak in the engine that could easily cause rough running and hard starting. It would also possibly trigger a check-engine light. Depending on the model and year of the car, you might be able to fit a replacement PCV, but sometimes the solution was to replace the entire rocker cover assembly, which included the valve in question. In many cases, the valve failure was accompanied by a failed rocker cover gasket that leaked oil on to the spark plugs, making the car run even more erratically. Don’t be tempted to try a second-hand PCV from a wrecked Barina. The chances are every high that it’s PCV will be trashed, too.

Question 4

What is causing my 2013 Holden Barina to misfiring on engine cylinder three?

Accepted Answer

If the fluid in question was fuel, you have a petrol leak and a big opportunity for the engine to catch fire. If it was water, it could be condensation from the atmosphere or perhaps even residual water from when you last washed the car. If not, the water could have come from the car’s cooling system, at which point you have a coolant leak and that needs to be fixed before the engine overheats. If the fluid was oil, suspicions would be a leaking rocker cover gasket. Fundamentally, there shouldn’t be any unexplained fluids in the engine bay or on the engine, and if there are, something is probably leaking. By the way, the fluid you notice could have actually been the cause of the misfire; spark plugs can misfire if they’re in contact with water or, especially, oil. My money’s on the fluid, indeed, being oil. The park plugs on this engine are located deep inside the rocker cover. Any leak from the gasket on that cover allows the oil to pool in the spark plug tube, which means it’s a fair chance this is the cause of your misfire, too.

Question 5

Why is the paint peeling off my 2015 Holden Barina?

Accepted Answer

Let me guess: Your car is white, yes? This has been a real problem, not just for Holden, but also Toyota, Kia, Hyundai and even Honda (and possibly others) around the world. The problem is a chemical one in the white paint being used and it leads to delamination of the paint layers, with the white top coat either flaking, chipping or peeling off in great swathes. Even some other colours have been noted succumbing to this process, but white seems to be the worst offender. Whether the problem is with the car’s preparation at the factory a function of a poor batch of paint from the supplier isn’t really known, but the finger is being pointed at the latter. Either way, it effectively destroys the resale value of your car as well as laying the car’s structure open to the elements. The best advice is to contact Holden’s customer service department and perhaps even have the car professionally inspected (your state motoring club is a good place to start here). In the past, carmakers have been known to repaint affected cars at their own cost which, given your car’s garage history, shouldn’t be out of the question.

Question 6

Why has my 2014 Holden Barina stopped working?

Accepted Answer

There are literally hundreds of reasons for a modern car to simply refuse to start. However, there’s one way to perhaps tell if the starter motor is the problem or not: When you turn the key, does the engine crank over? If it does, regardless of whether it starts or not, then the starter motor would appear to be fine. If the engine doesn’t crank, the starter motor might still be okay, but you might have a flat battery or an electrical problem. Even a problem with the automatic gear selector (in the switch that that prevents the engine being started in gear) can cause a no-crank situation even though the starter motor itself is fine. A good mechanic should be able to run a few tests and figure out pretty quickly what’s going on and what’s wrong. They will check the fuel system, ignition system and, of course, the starting system, and work it out from there.

Question 7

2014 Holden Barina won't select reverse

Accepted Answer

Based purely on your symptoms, a broken clutch is the most likely cause. When a clutch loses the ability to fully disengage the engine from the transmission (through either wear or damage) the gears can become very difficult to select. Sometimes they will engage with a crunch, at other times you may not be able to select them at all. This is a different problem to a worn clutch which has lost its clamping ability and is slipping, but the ultimate fix is the same: A new clutch assembly.

Question 8

Why is my 2007 Holden Barina dropping dead while driving?

Accepted Answer

The thing with problems like these is that you could be looking at a single fault or a group of problems that are each giving you a different symptom. Something could be getting hot in the engine management system that is causing the vehicle to shut down, and a good place to start looking would be the crank-angle sensor. When these get hot, they stop sending a critical signal to the engine’s computer and it just shuts down. After a short cool-down period, the sensor can often come back to life and away you go again. Meantime, a stuttering idle and inconsistent engine speed on start-up would make a lot of mechanics check out the stepper motor which is part of the throttle mechanism and is responsible for setting the idle speed and allowing the engine to start. Has your mechanic scanned the car or simply done a few basic checks? An electronic scan should be your next step if it hasn’t already been done.

Question 9

My 2010 Holden Barina won't go in to first or fifth gear

Accepted Answer

Losing particular gears can be a symptom of internal transmission damage, but it can also indicate a simpler problem with the selector mechanism that joins the gear stick to the gearbox. However, if this was the case, you’d probably lose two gears on the same selector plane (such as first and second or third and fourth) not first and fifth which are at opposite ends of the shifter mechanism. If there was internal gearbox damage, you’d possibly also be noting other noises and problems caused by the internal carnage, which makes me think the internal selector mechanism might be at fault. At which point, it’s probably a gearbox-out repair. However, a transmission specialist that knows this gearbox well may have a different opinion and should be your first port of call. A specialist will save you time and money in the long run.

Question 10

My 2018 Holden Barina is misfiring

Accepted Answer

What make you think it’s the MAF (Mass Air Flow) sensor? If you’ve simply googled the symptoms and found a forum that suggests the MAF sensor, be very careful. These forums are not universally populated by people who have the first idea of what they’re talking about. True, some forums are great and wise, but simply pulling an answer out of a hat without even seeing the car is a road to nowhere in many cases.

It's also why the advice we’d have to give is to have the car looked at by a professional who will probably start by electronically scanning the car to see what fault codes have been logged by the computer. It’s possible the MAF sensor is, indeed, the problem, but it could also be about a thousand other things that need to be ruled out before you start spending money on new parts that may or may not solve your problem. The fact is, these symptoms could be anything from a dud spark plug to a loose wire, either of which would cost a lot less to fix than fitting a new MAF sensor.

Holden Barina 2008 Problems

My 2018 Holden Barina is misfiring

2008 Holden Barina dropping out of gear

Holden Barina 2008: How do I fix the faulty dash?

Used Holden Barina review: 2005-2016

Holden Barina 2007: Is it a good first car for my daughter?

Used Holden Barina review: 2006-2011

Used Holden Barina review: 1989-2012

Used Holden Barina review: 2005-2008

Search from Over 8,000 questions Over 8,000 questions answered by CarsGuide

Complete Guide to Holden
Barina

Related cars for sale

cars

guide

Holden Barina 2008 Problems

My 2018 Holden Barina is misfiring

2008 Holden Barina dropping out of gear

Holden Barina 2008: How do I fix the faulty dash?

Used Holden Barina review: 2005-2016

Holden Barina 2007: Is it a good first car for my daughter?

Used Holden Barina review: 2006-2011

Used Holden Barina review: 1989-2012

Used Holden Barina review: 2005-2008

Search from Over 8,000 questions Over 8,000 questions answered by CarsGuide

Complete Guide to HoldenBarina

Related cars for sale

cars

guide

Complete Guide to Holden
Barina