Nissan Pulsar 2013 Problems

This sounds a lot like a faulty ignition barrel or an electronic key that has a semi-flat battery. A worn barrel can often prevent the necessary contacts meeting to complete the ignition circuit and, likewise, an electronic key without sufficient power can also give these symptoms as it struggles to enable the ignition. This can be a very hit and miss thing, which is just how you've described it.

So check the condition of the battery inside the key and perhaps the condition of the car's battery as well. If the situation gets worse, a trip to the auto electrician is probably in order. At least your STS model has a relatively conventional ignition key set-up, rather than the push-button, proximity key of the SSS model which brings another layer of complexity to this function.

Changing a clutch in any car is a big job and can easily cost the sort of money you’ve been quoted. And when that car is a front-wheel-drive vehicle, there are a lot of things to remove (like the driveshafts) before the gearbox can be removed and the new clutch fitted.

While I agree that the symptoms you’re reporting do sound like a worn out clutch, I’d like to know what else the mechanic thinks will be wrong. He or she may, for example, be budgeting for the removal and machining of the flywheel as part of the clutch replacement, That can easily add a couple of hundred to the bill. Also, where is the mechanic sourcing the new clutch? You may have found a replacement kit online for the $500 you’re quoting, but is it a quality part from a reputable brand or a no-name piece of rubbish from an internet clearing house?

Try gently releasing the clutch while you’re holding the lever in the reverse position. It’s probably an adjustment issue, it could be a clip that’s broken, and nothing serious. I would take it to a mechanic who should be able to tell you exactly what is wrong with it.

If we were in the USA your car would be called a ‘lemon’ and you would be getting a refund or a replacement car. Unfortunately this isn’t America and we have pathetically weak consumer laws and an even weaker body (ACCC) overseeing them. You could try to negotiate a deal with Nissan, who I don’t think have a leg to stand on, or get a lawyer involved.

You would like to think that it shouldn't happen, but the reality is that sometimes it does. As it's out of warranty it's up to you to try and negotiate a deal with Nissan to cover at least part of the cost of the repairs. Do that by going directly to Nissan's customer service (1800 035 035) and requesting them to help out. If that fails you could seek help from the Victorian Government's consumer affairs department.

Nissan spokesman Chris Jordan can clear up the misunderstanding: "We do not instruct Nissan dealers to do any specified oil change on Xtronic (CVT) transmission in the 2013 Pulsar. Dealers are able to monitor any potential CVT deterioration via computer when analysing data at service. We do, however, recommend dealers inspect (and if necessary replace) CVT fluid every 100,000km in cases of high loading on the transmission, such as towing or off-road use."

You should ask for a new sender unit under warranty. They gauge should read properly and Jim Cummings' experience shows there is a problem.

It looks as if Nissan Australia has not communicated nearly well enough with its dealers. We've also had an update from the Juke owner with a similar issue — numerous dealers are still quoting the outdated service details.